1. Upper tube

List of Components

ItemSpecQty 
 Galva tube500 / Ø27mm2
 L 90°Ø27mm1
 HookØ27mm1
 Pivot female/2

Tools needed

Allen Key 5mm

Instructions

  1. Slide the 2 tubes into the L 90° and tighten down.
    1. Slide the hook at the end of the horizontal tube and tighten down.
      1. Slide the 2 female pivots on the vertical tube. One is at the end of the tube and the other is 300mm away from the end. Then tighten down.

        Animation

        Make sure that the 2 pivots are aligned.